Sable AWD V6-3.5L (2008)
104. Using new O-ring seals, connect the A/C tubes and install the 2 nuts.
^
Tighten to 15 Nm (11 lb-ft).
105. Using a new O-ring seal, connect the upper A/C tube to the condenser and install the nut and connect the A/C pressure switch electrical connector.
^
Tighten to 15 Nm (11 lb-ft).
106. If equipped, attach the block heater wiring harness retainer to the radiator and power steering tube.
107. Connect the transaxle control cable to the shift cable bracket.
