Sable AWD V6-3.5L (2008)
Removal
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
1. Remove the LH ignition coils.
2. Remove the oil level indicator.
3. Disconnect the LH variable camshaft timing (VCT) solenoid electrical connector.
4. Detach and disconnect the 2 engine control wiring harness electrical connectors.
5. Detach all of the wiring harness retainers from the LH valve cover stud bolts.
6. Disconnect the 3 LH fuel injector electrical connectors.
7. Loosen the 11 stud bolts and remove the LH valve cover.
