Sable AWD V6-3.5L (2008)
Upper Intake Manifold (Part 2)
Upper Intake Manifold (Part 3)
Removal
All engines
1. Remove the air cleaner outlet pipe.
2. Disconnect the throttle body (TB) electrical connector.
3. Disconnect the evaporative emissions (EVAP) tube from the intake manifold.
4. Detach the EVAP tube pin-type retainer from the upper intake manifold.
5. Disconnect the brake booster vacuum hose from the intake manifold.
6. Disconnect the PCV tube from the PCV valve.
Early build engines
7. Disconnect the heated PCV electrical connector.
8. Remove the upper intake manifold long support bracket bolt.