mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Temperature Blend Door Actuator - RH|Page 5647 > < Temperature Blend Door Actuator - RH|Page 5645
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Auxiliary Mode Door Actuator

AUXILIARY MODE DOOR ACTUATOR

Removal and Installation

1. Remove the LH quarter trim panel.
2. Disconnect the auxiliary mode door actuator electrical connector.
3. Remove the 2 auxiliary mode door actuator screws.
4. Remove the auxiliary mode door actuator.
5. To install, reverse the removal procedure.

Temperature Blend Door Actuator - RH|Page 5647 > < Temperature Blend Door Actuator - RH|Page 5645