Sable AWD V6-3.5L (2008)
Maintenance Required Lamp/Indicator: Service and Repair
Check Engine Indicator
The Check Engine indicator light illuminates when the
ignition is first turned to the ON position to check the bulb and to
indicate whether the vehicle is ready for Inspection/Maintenance (I/M)
testing. Normally, the Check Engine light will stay on until the engine is cranked, then turn itself off if no malfunctions are present. However, if after
15 seconds the Check Engine light blinks eight times, it means that the vehicle is not ready for I/M testing.
Solid illumination after the engine is started indicates the On Board
Diagnostics System (OBD-II) has detected a malfunction. Refer to On
board diagnostics (OBD-II) in the Maintenance and Specifications
chapter. If the light is blinking, engine misfire is occurring which could
damage your catalytic converter. Drive in a moderate fashion (avoid
heavy acceleration and deceleration) and have your vehicle serviced
immediately by your authorized dealer.uthorized dealer.
CAUTION: Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior
floor coverings or other vehicle components, possibly causing a fire.
