mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Transmission Fluid Drain and Refill|Page 1359 > < Fluid - A/T|Capacity Specifications|Page 1356
Page 1
background image

Fluid - A/T: Service and Repair
Transmission Fluid Drain and Refill

Transmission Fluid Drain and Refill

NOTE: In order to completely clean the torque converter, this procedure needs to be carried out 3 times.

1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: If an internal problem is suspected, drain the transmission fluid through a paper filter. A small amount of metal or friction particles may be

found from normal wear. If an excessive amount of metal or friction material is present, the transaxle will need to be overhauled.

Remove the transmission fluid drain plug and allow the transmission fluid to drain.

3. Install the transmission fluid drain plug. 

^

Tighten to 9 Nm (80 lb-inch).

4. Fill the transaxle with clean transmission fluid.

Transmission Fluid Drain and Refill|Page 1359 > < Fluid - A/T|Capacity Specifications|Page 1356