mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Driver Air Bag Module|Page 6009 > < Driver Air Bag Module|Page 6007
Page 6
background image

2. NOTE:  The illustration shows incorrectly positioned wire clips.

If the wire clips are not correctly positioned in any of the 10 attachment points, reposition the wire clips as necessary.

3. CAUTION:  Make sure the steering wheel controls wiring is routed clear of the driver air bag module attachment points on the steering

wheel so that the wiring is not pinched during driver air bag module installation. Failure to follow these instructions may result in
component damage and/or system failure.

Route the steering wheel controls wire harness into the clips as shown.

Driver Air Bag Module|Page 6009 > < Driver Air Bag Module|Page 6007