Sable AWD V6-3.5L (2008)
Seats with manual lumbar adjust
12. Remove the manual lumbar handle.
-
On driver seat, remove the clip and manual lumbar handle.
-
On passenger seat, remove the screw and the manual lumbar handle.
All seats
13. Release the seat back lower trim cover J-clip.
14. WARNING: Front seat backrest trim covers installed on seats equipped with seat side air bags cannot be repaired. A new trim cover
must be installed. Cleaning is permissible. Failure to follow these instructions may result in the seat side air bag module deploying
incorrectly and increase the risk of serious personal injury or death in a crash.
CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip. The hook-and-loop strip can be torn
from the seat cushion foam. Failure to follow these instructions may result in component damage and/or system failure.
Place a hand between the seat backrest trim cover and foam pad and carefully separate the hook-and-loop strips, then carefully roll up the seat
back trim cover in an inside out fashion to the first row of hog rings in the front.
-
On passenger seat, pull the backrest fold flat nylon release strap through the trim cover bezel opening.
15. Remove the first row of hog rings.
16. Release the hook-and-loop strips and carefully roll up the seat back trim cover to the second row of hog rings in the front.
17. Release the J-clips at the back of the trim cover.
