Sable AWD V6-3.5L (2008)
4. Separate the pivot release cable and casing and remove the pivot release handle.
5. Remove the 2 screws on each side at the bottom of the load floor panel.
6. Pull out to release the retainers and remove the load floor panel.
-
Use a suitable trim retainer tool to disengage the load floor from the seat.
7. Remove the screw, release the tab and remove the LH floor latch cover.
8. Remove the screw, release the tab and remove the RH floor latch cover.
9. Release the cushion trim cover retainers from the cushion frame and remove the trim cover and foam pad.
-
On assembly, the lower anchors and tethers for children (LATCH) and child safety seat tether anchor must be accessible through the trim
cover.
10. Remove the 8 cushion frame-to-pivot tube assembly bolts.
