mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Removal and Replacement|Page 4181 > < Removal and Replacement|Page 4179
Page 12
background image

2. NOTICE: Do not handle the solenoid body in the leadframe area or by the screens of the solenoid body filter or damage to the solenoid body may

occur.

NOTICE: Use care not to break the alignment tabs when installing the solenoid body filter. Damage to the transaxle will occur if the solenoid
body is not correctly aligned.

NOTICE: Make sure that the filter passage areas are clean of foreign material before installing the filter. Damage to the transaxle will occur if the
filter passages are not clean.

Install a new solenoid body filter assembly by pushing it straight down onto the alignment tabs.

Main Control

Main Control

Removal and Replacement|Page 4181 > < Removal and Replacement|Page 4179