Sable AWD V6-3.5L (2008)
10. NOTE: Before the urethane has set, partially lower the windows to prevent the glass from being pushed out of position when a door is closed.
Install the rear quarter window glass on the vehicle aligning it with the markings made previously.
11. WARNING: Do not drive vehicle until the urethane seal has cured. Follow urethane manufacturer's curing directions. Inadequate or
incorrect curing of the urethane seal will adversely affect glass retention. Failure to follow these instructions may result in serious injury
to vehicle occupant(s).
After the urethane has cured, check the rear quarter window glass seal for air or water leaks through the urethane adhesive bead and add urethane
adhesive as necessary.
12. Install the parcel shelf, C-pillar and D-pillar trim panels.