Topaz L4-140 2.3L CFI (1985)
4.
Check seal to ensure it is positioned properly.
5.
Install damper.
6.
Install damper bolt and tighten to 111-139 Nm (80-100 ft lb).
7.
Lower vehicle.
8.
Raise engine assembly.
9.
Raise vehicle.
10.
Install stabilizer bar brackets to body and tighten to 63-72 Nm (47-55 ft lb).
11.
Lower vehicle.
12.
Install idler pulley bracket.
13.
Install idler pulley.
14.
Install engine mount and tighten the nut and bolts to the engine bracket to 80-120 Nm (60-90 ft lb). Tighten the bolts to the body to 50-75 Nm
(40-55 ft lb). Tighten the nuts to the body to 100-135 Nm (75-100 ft lb).
15.
Install belt tensioner.
16.
Remove engine support bar.
17.
Install fuel line shield.
18.
Install drive belt(s).
19.
Connect battery ground cable.
20.
Close hood.
