Topaz L4-140 2.3L CFI (1985)
Engine Control Module: All Technical Service Bulletins
EEC IV - New Diagnostic Procedure
Article No. 85-25-10
EEC IV - 1985 VEHICLES BUILT AFTER 9/9/85 WITH 1986 LEVEL PROCESSORS - NEW DIAGNOSTIC PROCEDURE
FORD 1985 TEMPO
TOPAZ 1985 TOPAZ
CALIBRATIONS: 5-26E-R21 (49S), 5-26R-R16 (Calif.)
On some late 1985 model vehicles built after 9/9/85, the calibration was changed to use a new 1986 level processor. These processors require the use of
1986 2.3L HSC base engine Diagnostic Procedures due to design changes unique to 1986 and not found in 1985.
NOTE:
Do not use the 1985 Diagnostic Procedures. Condition codes may be encountered that are defined only in the 1986 Diagnostic Procedures.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
