mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine - Engagement/Deceleration Stalls|Page 908 > < Engine - Cold Engagement/Deceleration Stall|Page 903
Page 1
background image

Coolant Temperature Sensor/Switch (For Computer): Customer Interest
Engine - Engagement/Deceleration Stalls

Article No. 85-9-27

STALLS - ENGAGEMENT/DECEL AFTER INITIAL COLD START - 2.3L HSC CFI

FORD 1985 TEMPO LINCOLN-MERCURY 1985 TOPAZ

Engagement or decel stalls after the first initial cold start, may be caused by the basic vacuum system or EEC IV system malfunction. In order to
diagnose which system may be causing the stall concern, the following procedure should be performed.

Figure 27

1.

Check and adjust ignition timing - See Figure 27 shown on page 120.

NOTE:

Timing symbol values for 1985 ATX vehicles are different than 1984 ATX vehicles. See Figure 27, page 120.

2.

Check for engine vacuum leaks.

3.

Perform the EEC IV Quick Test (see 1985 Shop Manual, Volume H) and service any codes as required.

Engine - Engagement/Deceleration Stalls|Page 908 > < Engine - Cold Engagement/Deceleration Stall|Page 903