Topaz L4-140 2.3L CFI (1985)
Alignment: Service and Repair
Rear
CASTER & CAMBER
Caster and camber cannot be adjusted and are factory set.
Fig. 2 Rear wheel toe-in and toe-out alignment cam
TOE-IN & TOE-OUT
Toe-in and toe-out can be adjusted when it is determined that the vehicle is not within alignment specifications. To adjust toe of either wheel,
loosen bolt attaching rear control arm to body and rotate alignment cam until the required alignment setting is obtained. Tighten control arm
attaching bolt to 40-55 ft lb.
