Topaz L4-140 2.3L HSC (1984)
Figure 14
Correction:
Apply a bead of black silicone rubber adhesive between the top of division bar and door frame (both inside and outside) as shown in
Figure 14.
TEMPO/TOPAZ
3.
Concern: Low pressure of the flocked run sealing lips on the door glass at upper rear corner of the door cause wind noise.
Figure 15
Correction:
Install a piece of 1/8"x3/4"x1-1/2" long foam tape to the inner upper moulded corner of flocked run so that the glass sealing lips lie on
top of the foam tape as shown in Figure 15.
4.
Concern: A gap exists between the belt moulding and the door at the rear radius of the moulding.