mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor > < Knock Sensor|Description and Operation
Page 1
background image

Main Relay (Computer/Fuel System): Technical Service Bulletins
EEC IV Power Relay - Location Correction

Article No. 83-22-15

EEC IV POWER RELAY - LOCATION

FORD 1984 TEMPO - ALL

LINCOLN-MERCURY 1984 TOPAZ - ALL

CALIBRATIONS: All

Location of Power Relay incorrectly shown in the Electrical and Vacuum Troubleshooting Manual (EVTM) No. 0334-527-84.

Figure 6

Figure 2 on page 31 of the 1984 Tempo/Topaz EVTM incorrectly shows the EEC IV power relay attached to the rear of the Electrical Control Assembly
Module. The EEC IV relay is attached to the dash panel behind the glove compartment (Figure 6).
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Manifold Pressure/Vacuum Sensor > < Knock Sensor|Description and Operation