Topaz L4-140 2.3L HSC (1984)
Needle And Seat: All Technical Service Bulletins
Engine - Cold Stalling/No Start Condition
Article No. 85-10-14
STALL AFTER COLD START AND DRIVEAWAY - NO START - 2.3L HSC
FORD 1983 1/2-84 TEMPO
LINCOLN-MERCURY 1983 1/2-84 TOPAZ
CALIBRATIONS: 4-25A, D, 1E, F, G;4-26B, E, G, J, K; 5-25G and 5-26G.
WARNING:
This modification is authorized only for the listed engines. Performing this modification on other engine calibrations is unauthorized and
could create liability under applicable federal or local laws.
NOTE:
This article updates TSB 84-14-29. Vehicles which stall on cold start and driveaway may need the latest design level carburetor needle and
seat assembly to correct the condition. Needle and seat concerns can be properly diagnosed using the following procedure.
PROCEDURE:
Figure 19MODEL 6149 FEEDBACK CARBURETOR
