Topaz L4-140 2.3L HSC (1984)
Figure 6
2.
Attempt to insert the shaft of a new #52 drill (.063) in. to all three terminals of the connector. DO NOT FORCE. If the drill goes freely into the
terminal nearest the square corner, the terminal must be replaced. SEE FIGURE 6, VIEW "B" AND "C" FOR DETAILS.
NEVER use a probe tool larger than a #52 drill.
PART NUMBER
PART NAME
CLASS
*E3SZ-14487-A
Terminal
C
*-Available at National Parts Distribution Center 11-23-83.
OTHER APPLICABLE ARTICLES: None