mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

All Other Service Bulletins for Steering Column Bearing:|831416 > < Fuel Control Solenoid - Clicking Noise
Page 2
background image

FIGURE 16

3.

Using double latch tie strap (N802862) make a loop around the upper hose on the solenoid, near end of hose. Pull loop tight. (Figure 16).

NOTE:

If this strap is not available, TWO similar binding straps could be substituted.

FIGURE 17

4.

Let solenoid hang. Then make a second loop around the electrical harness (-14290-). Latch tie strap, but do not tighten completely! (Figure 17)

PART NUMBER

PART NAME

CLASS

N802862-S

Tie Strap

S

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP9998A84
TIME:

0.3 Hr. DLR. CODING: Basic Part No. 9B998 Code: 56

All Other Service Bulletins for Steering Column Bearing:|831416 > < Fuel Control Solenoid - Clicking Noise