Topaz AWD L4-140 2.3L HSO (VIN S) (1988)
/Page-1188002.png)
3.
Using the original ignition key, decode tumbler station numbers 5, 7, 8, 9, and 10.
4.
Cut the new service key on tumbler station numbers 5, 7, 8, 9, and 10.
5.
Check the operation of the new service key in the new ignition lock and outside door locks.
6.
Install the new service ignition lock.
NOTE:
Retain both the original and new service key tabs for future key code identification.
OTHER APPLICABLE ARTICLES: 86-23-4
WARRANTY STATUS: "INFORMATION ONLY"
