Topaz AWD L4-140 2.3L HSO (VIN S) (1988)
/Page-1482009.png)
Figure 12
d.
Install the "A" pillar limit switch to the bracket/track assembly. Make sure the rubber limit switch bumper is installed correctly and the switch
plunger passes through the plunger opening in the bracket as shown in Figure 12.
Figure 4
SHOULDER STRAP TRACK INSTALLATION
1.
Loosely install the track assembly to the body, Figure 4.
2.
Tighten the two (2) "B" pillar rear support bracket attaching bolts to 17-24 lb.ft. (23-33 N-m).
3.
Tighten the two (2) overhead track retaining screws, Figure 4.
4.
Install the limit switch bracket to the "A" pillar as follows:
