Topaz AWD L4-140 2.3L HSO (VIN S) (1988)
/Page-1482010.png)
Figure 13
a.
Rest the limit switch bracket against the "A" pillar.
b.
Locate a new attaching hole location about midway between the old locator slot in the "B" pillar sheet metal and the top of the slot in the
bracket as shown in Figure 13.
c.
Prick-punch the location.
d.
Using a suitable drill stop, drill a 5/16" (4 mm) diameter hole into the sheet metal.
Figure 13
