Topaz AWD L4-140 2.3L HSO (VIN S) (1988)
Clutch: Service and Repair
Intermediate Clutch
DISASSEMBLE
Exploded View Of Intermediate Clutch Assembly
NOTE: Refer to the Exploded View of Intermediate Clutch Assembly when performing this procedure.
1. Using expanding-type snap ring pliers, remove intermediate shaft retaining ring.
2. Remove intermediate shaft from intermediate clutch cylinder and inspect shaft stop ring. Remove stop ring if damaged.
3. Remove clutch pack retaining ring, pressure plate, clutch pack, and wave spring.
4. Remove seal rings from clutch cylinder hub.