Topaz FWD L4-140 2.3L CFI (1987)
3.
Install valve extension and then place wheel cover in position on wheel, and reinstall lug nuts with plastic retainers. Torque to 85-105 ft.lbs.
(115-142 N-m), see Figure 7.
Figure 8
4.
Remove remaining two (2) nuts. Install plastic split ring retainers into grooves of nuts making sure they snap into place and reinstall lug nuts with
plastic retainers. Torque to 85-105 ft.lbs. (115-142 N-m), see Figure 8.
NOTE:
When removing wheel covers do not pry on the edge of the wheel cover. This could result in damage to the wheel cover. To remove wheel
cover, remove lug nuts and then remove the wheel cover by hand. The plastic retainers should be left on the lug nuts and the wheel cover
reinstalled to the wheel using the plastic teeth for guides. Once the wheel cover is on the wheel, reinstall the wheel to the vehicle using lug nuts
with the plastic retainers and torque nuts to 85-105 ft.lbs. (115-142 N-m).
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
