Topaz FWD L4-140 2.3L HSC (VIN X) (1989)
Alignment: Service and Repair
Toe
Adjusting Front Toe
To adjust toe-in, Fig. 1, lock steering wheel in the straight ahead position using suitable steering wheel holder. Remove small outer clamp from
steering boot to prevent boot from twisting during adjustment procedure. Loosen tie rod adjusting nuts, then adjust left and right tie rods until each wheel
has 1/2 the desired total toe specification. Tighten tie rod adjusting nuts, replace steering gear rubber boots and tighten clamp. Remove steering wheel
holding tool.