Topaz FWD L4-140 2.3L HSC (VIN X) (1989)
/Page-1337010.png)
Fig. 4 Yoke Plug Locknut Removal & Installation
Fig. 3 Adjusting Yoke Plug
Fig. 10 Removing & Installing Pinion Bearing Locknut
Disassembly
1.
Thoroughly clean rack and pinion assembly and mount in a vise, clamping only by the steel tube section between the rack pressure ports.
2.
Do not remove the external pressure lines unless damaged or leaking. If the lines are removed the copper seals must be replaced.
