Topaz FWD L4-140 2.3L HSO (VIN S) (1988)
4.
File or sand bracket and bumper mating surfaces to remove weld flash so bracket fits flush to bumper, Figure 1.
5.
Wipe bumper and mounting bracket mating surfaces with isopropyl alcohol.
6.
Make sure bracket and bumper line up properly using locating nibs on bumper, Figure 1.
7.
Mix equal amounts of the two-part adhesive. The mixed adhesive must be used within five
(5)
minutes.
Figure 2
8.
Apply mixed adhesive to mounting bracket flange and install on bumper, Figure 2.
9.
Lightly clamp bracket to bumper to keep bracket in place. Use cardboard or piece of wood or similar material to protect bumper outside surface.
10.
Allow adhesive to set-up for one (1) hour before removing clamp. Do not reposition during setup time.
11.
Install bumper on vehicle.
SERVICE PART APPLICATION CHART
Model Usage
Part Name
Part Number
1988 Tempo/Topaz
Bracket - Front BumperE83Z-17C972-A
-
R.H.
1988 Tempo/Topaz
Bracket - Front BumperE83Z-17C973-A
-
L.H.
1988 Tempo/Topaz
Bracket - Rear Bumper E83Z-17B930-A
-
4 Door - R.H.
1988 Tempo/Topaz
Bracket - Rear Bumper E83Z-17B931-A
-
4 Door - L.H.
"A-1 Structural Adhesive"
Supplier:
Fibre Glass - Evercoat Co., Inc. Procure locally from Automotive Paint Supplier. If not available, contact Supplier - Phone No.:
1-800-543-4530
PART NUMBER
PART NAME
CLASS