Topaz FWD L4-140 2.3L HSO (VIN S) (1988)
/Page-1671027.png)
Figure 20
10.
Connect the drive track to the vertical guide, Figures 18 & 20.
11.
Engage the drive belt motor/drive teeth and install the drive belt track retaining screws.
a. Tighten the screws to 22-35 lb.in. (2.5-4.0 N-m).
Figure 21
b. Engage the rear lower guide to motor/drive track, Figure 21.
12.
Install the front seat shoulder strap track to the track assembly as follows:
a. Return shoulder strap track carrier to "B" pillar position.
b. Grasp the strap anchor and pull the strap webbing out of the retractor in the console. Allow webbing to lie flat on the seat with no twist.
