Topaz FWD L4-140 2.3L HSO (VIN S) (1988)
Figure 9
11.
Install the reworked bracket to the track assembly, Figure 9. Make sure that attaching screws are tightened to 18-27 lb.in. (2-3 N-m).
12.
Before installing the "A" pillar limit switch into the bracket, apply lithium/teflon grease (E7FZ-19590-A) to the limit switch plunger.
Figure 2
13.
Install the "A" pillar limit switch to the bracket/track assembly. Make sure the rubber limit switch bumper is installed correctly and the switch
plunger passes through the plunger opening in the bracket as shown in Figure 2.