Tracer L4-110 1.8L DOHC (1995)
Transmission Range Switch: Testing and Inspection
Transmission Range Switch (ATX)
Transmission Range Switch
Measure the resistance between BK/Y and BK/R wire terminals at the connector leading to the Transmission Range (TR) switch under the following
conditions:
Gearshift Lever Position
Resistance
Park (P)
Less than 5 ohms
Neutral (N)
Less than 5 ohms
All Other Positions
Greater than 10,000 ohms
If the resistance is not as specified above, replace the TR switch.
