mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Horn - Intermittent Operation|Page 3092 > < Exhaust System - Buzzing/Rattling Noise|Page 3086
Page 1
background image

Grounding Point: All Technical Service Bulletins
Horn - Intermittent Operation

Article No. 
96-8-5

HORN - INTERMITTENT OPERATION - VEHICLES BUILT THROUGH 2/1/96

FORD: 
1995-96 ESCORT

LINCOLN-MERCURY: 
1995-96 TRACER

ISSUE: 
The horn may work intermittently at various steering wheel positions on some vehicles. This may be caused by an intermittent horn ground through the
steering wheel bearing.

ACTION: 
Install a redundant ground to the horn circuit by installing a clip to the steering column tube. The redundant ground should reduce the possibility of an
intermittent ground in the horn circuit. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

Install a clip (F5CZ-3F686-AA) onto the steering column tube as shown in Figure 1. A screwdriver or a pair of pliers should be used to snap the clip into
position. Make sure that a small amount of dielectric grease is applied to the contact point prior to installation.

PART NUMBER

PART NAME

F5CZ-3F686-AA

Clip

D0AZ-19584-AA

Multi-Purpose Grease

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION

DESCRIPTION

TIME

960805A

Install Clip

0.3 Hr.

Horn - Intermittent Operation|Page 3092 > < Exhaust System - Buzzing/Rattling Noise|Page 3086