Mercury Workshop Service and Repair Manuals > Tracer L4-110 1.8L DOHC (1995) > Powertrain Management | Transmission Control Systems | Sensors and Switches - Transmission and Drivetrain | Sensors and Switches - A/T | Transmission Range Switch <--> [Transmission Position Switch/Sensor, A/T] | Component Information | Service and Repair | Park/Neutral Position Switch (Manual Transaxle Only)

Page 2

1. Position the TR switch onto the manual control lever.

2. Install the bolts securing the electrical connector brackets to the case.

3. Install the bolts securing the TR switch but do not tighten them.

4. Connect the electrical connectors located on the top and on the side of the transaxle case.

5. Adjust the TR switch.

6. Tighten the manual control lever nut to 44-64 Nm (33-47 lb ft).

7. Install the air cleaner outlet tube.

8. Connect the battery ground cable.