Tracer L4-110 1.8L DOHC (1995)
Throttle Valve Cable/Linkage: Adjustments
ADJUST
1. Remove splash shield next to left front tire.
Pressure Gauge Connection
2. Remove square head plug (marked L) and install transaxle test adapter tool No. D870-77000-A and pressure gauge tool No. T57L-77820 or
equivalents.
Kickdown Cable Adjustment
3. Loosen kickdown cable by turning locknuts away from throttle cam.
4. Shift transaxle into P, then start and run engine until it reaches normal operating temperature.
NOTE: Ensure engine idle speed is 700-800 RPM.
5. Turn locknuts toward throttle cam until line pressure indicated on pressure gauge begins to exceed 63-66 psi.
6. Turn locknuts away from throttle cam until a line pressure of 63-66 psi is reached.
7. Tighten locknuts, then turn engine OFF.
8. Remove pressure gauge and adapter and install square head plug. Torque plug to 43-87 in lbs.
