mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Door Latch - Switch Replacement Procedure Revised|Page 5923 > < Brakes - Roughness During Application|Page 5918
Page 1
background image

Technical Service Bulletin # 00-18-7

Date: 000904

Door Latch - Switch Replacement Procedure Revised

Article No.
00-18-7

09/04/00

SEAT BELT - REVISED DOOR LATCH SWITCH 
SERVICE PROCEDURE

FORD: 
1991-1996 ESCORT

MERCURY: 
1991-1996 TRACER

ISSUE
The door latches (right and left) contain a switch which is an input to the passive restraint system. Previous to this article, the entire latch needed to be
replaced to service a suspect switch. This article provides a new switch part number and procedure to install the switch.

ACTION
Install a new front door latch switch. Refer to the following Service Procedure for details.

Parts Block

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

Labor Time

DEALER CODING

OASIS CODES: 104000

Removal

1.

Install battery memory saver and disconnect the battery.

2.

On vehicles equipped with manual windows, remove the front window regulator handle.

3.

On vehicles equipped with power windows, remove and disconnect the window regulator switch housing from the armrest. See Service Manual,
Section 01-11.

4.

Remove the door trim panel. Follow instructions in Service Manual, Section 01-05.

Door Latch - Switch Replacement Procedure Revised|Page 5923 > < Brakes - Roughness During Application|Page 5918