Tracer L4-116 1.9L SOHC (1991)
Filler Neck Attaching Bolt
Filler Neck Assembly
12.
Remove the filler neck assembly.
INSTALLATION:
1.
Place the filler neck assembly into it's mounting position.
2.
Install the filler neck assembly attaching bolts and tighten to 8-11 Nm (69-95 lb.in).
3.
Connect the vapor hoses to the vapor tubes.
4.
Connect the filler neck hose to the filler neck and install the attaching clamp.
5.
Connect the overflow hose to the overflow tube and install the attaching clamp.
6.
Position the fuel filler neck splash guard and install the attaching screw.
7.
Lower the vehicle.
8.
Position the fuel filler neck retainer and install the attaching screws.
9.
Install the filler neck cap.
10.
Connect the negative battery cable.
