Tracer L4-116 1.9L SOHC (1991)
Figure 3
2.
Install pin into hole on throttle cam, Figure 2 and 3.
Figure 4
3.
After the valve body is installed, remove pin and install bolt, Figure 4. Refer to the 1991 Escort/Tracer Shop Manual for valve body service details.
NOTE:
WHEN INSTALLING THE BOLT, IT IS NECESSARY TO APPLY SEALANT TO PREVENT OIL LEAKAGE.
4.
Line pressure must still be set by the throttle cable, using a gauge on the line pressure port.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
501000, 502000, 503300