Tracer L4-116 1.9L SOHC (1991)
13. Install a new (A) upper gasket, (B) upper separator plate, and a new (C) main upper gasket onto the upper control valve body.
NOTE: Do not confuse the (A) upper gasket with the (B) main upper gasket.
14. Install the (A) screw securing the main upper gasket, the upper separator plate, and the upper gasket to the upper control valve body.
15. Align the throttle plug assembly groove and the bolt hole of the upper valve body, then set the upper control valve onto the main control valve
body. Install the bolts and finger tighten only.
