mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

All Other Service Bulletins for Wheel Hub: > < Lug Nuts - Proper Torqueing Procedure
Page 1
background image

Wheel Hub: Customer Interest
Front Hub - Snapping Noise At Slow Speed

^

SUSPENSION - FRONT - "SNAPPING" NOISE FROM

FRONT END

-

^

NOISE - "SNAPPING" - FROM FRONT AXLE DURING SLOW SPEED

Article No. 91-1-4
FORD:

1991 ESCORT

LINCOLN-MERCURY: 1991 TRACER

ISSUE:

A snapping noise may be heard from the front end area. This usually occurs while the vehicle is moving slowly (1 to 3 mph) in forward or
reverse, with the steering wheel fully turned to either side. This noise is caused by the sticking and slipping of the wheel hub.

Figure 1

ACTION:

Install a new front wheel bearing assembly on each side of the car. Apply Threadlocker 262 (E2FZ-19554-B) to the wheel bearing outer
race before pressing the bearing into the knuckle, Figure 1. Refer to the 1991 Escort/Tracer Shop Manual, Pages 04-01-13 through
04-01-15.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:

Eligible Under Basic Warranty Coverage

OPERATION    

DESCRIPTION

TIME

910104A

Install Both Front Wheel

2.9 Hr.

Bearings

DEALER CODING

BASIC PART NO.    CONDITION CODE

1215

56

OASIS CODES:

304000, 306000, 702000, 702100

All Other Service Bulletins for Wheel Hub: > < Lug Nuts - Proper Torqueing Procedure