Tracer L4-116 1.9L SOHC (1991)
Wiper Motor: Service and Repair
Front Wiper Motor
1.
Disconnect battery ground cable.
2.
Remove wiper arm attaching nut cover, then attaching nut and pull wiper arm from pivot shaft.
3.
With hood closed, remove seven screw covers from cowl grille screws.
4.
Remove seven cowl grille screws, then cowl grille.
5.
Pry up four baffle retaining clips, then remove baffle trim piece.
6.
Remove wiper linkage retaining clip, then disconnect wiper linkage from motor. Ensure that wiper motor is in the PARK position before
disconnecting linkage.
7.
Disconnect two motor electrical connectors, then remove three mounting bolts and motor.
8.
reverse procedure to install. Torque wiper motor mounting bolts to 61-87 inch lbs.
