Tracer L4-122 2.0L SOHC (1997)
21. Install the coasting clutch pressure plate.
22. Install the coasting clutch pressure plate snap ring.
23. With the coasting clutch assembled, check the coasting clutch disc pack clearance.
NOTE: Take several measurements and calculate. the average value.
Use a feeler gauge to measure between the coasting clutch pressure plate and the coasting clutch pressure plate snap ring. The clearance should be
1.0-1.23 mm (0.0390-0.048 inch). If the clearance is not within the specification, adjust it by selecting the proper snap ring. Refer to the Snap
Ring Sizes chart below.
Snap Ring Sizes
1.60 mm (0.063 inch)
1.75 mm (0.069 inch)
1.90 mm (0.075 inch)
2.05 mm (0.081 inch)
2.20 mm (0.087 inch)
2.35 mm (0.093 inch)
2.50 mm (0.098 inch)
2.65 mm (0.104 inch)
