Tracer L4-1589cc 1.6L SOHC (1989)
Seat Belt Retractor: Service and Repair
Front Seat Belt, Retractor and Tongue
REMOVAL
1. Remove plastic cap, bolt lock washer, spacer and washer at seat belt guide bar then slide guide bar out of bushing.
2. Slide seat belt harness out of guide bar.
3. Pull seat belt harness cover off to remove anchor bolt.
4. Remove rear quarter or "B" pillar trim panel.
5. Remove bolt securing seat belt retractor.
6. Remove retractor and harness assembly.
INSTALLATION
1. Position retractor and harness assembly and install seat belt retractor bolt. Tighten bolt to 39 Nm (29 ft lbs).
