Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Front Door Window Regulator: Service and Repair
Removal and Replacement
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door window glass.
3. Remove the two front door brace bolts and the front door brace.
4. Disconnect the front window regulator electric drive electrical connector.
5. Remove the four front door window glass regulator track bolts.
6. Remove the three front window regulator electric drive bolts.
7. Remove the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front
door.
INSTALLATION
1. Install the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front
door.
2. Install the three front window regulator electric drive bolts. Tighten the front window regulator electric drive bolts securely.
