Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Head Rest: Service and Repair
Head Restraint (W/ Child Seat)
REMOVAL
1. Remove the center seat back panel by removing the eight scrivets.
2. Remove the two screws from the base of the head restraint guide rods.
3. Remove the burrs around the screw holes, using a hand file.
4. Pull the head rest out of the head rest guide rod sleeve.
INSTALLATION
1. Insert the head rest guide rod sleeves.
2. Slide the head rest restraint into the seat head rest guide rod sleeves.
3. Install the two retaining screws at the bottom of the head rest rods.
4. Position and install the eight scrivets in the center seat back panel.