Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
1O.Remove the five front transaxle-to-engine hole bolts.
11. Remove the front transaxle-to-engine brace.
12. Remove the 18 oil pan bolts in the sequence shown.
13. Remove the oil pan. Discard the oil pan seals.
INSTALLATION
Applying Silicone Sealant To Oil Pan End Gaskets
1. Install new oil pan seals. Apply Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-AG to the
oil pan seals as shown.
NOTE: Ensure that the oil pan and engine mating surfaces are cleaned of any old sealant.