Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
20. Disconnect the accelerator cable from the throttle lever.
21. Remove the speed control actuator cable from the hanging bracket, if equipped.
22. Remove the accelerator cable from the bracket attached to the top of the upper intake manifold.
23. Loosen the accelerator cable locknut and remove the accelerator cable from the bracket on top of the upper intake manifold.
24. Loosen the speed control actuator cable locknut if equipped, and remove the speed control actuator cable from the bracket on the top of the upper
intake manifold and position aside.
25. Disconnect the brake booster hose from the power brake booster check valve.
26. Remove the exhaust gas recirculation (EGR) valve-to-back pressure transducer (BPT) valve tube from the EGR valve (EGR valve).
27. Remove the EGR valve to exhaust manifold tube from the EGR valve.
28. Disconnect the fast idle control (FIC) solenoid electrical connector.
29. Disconnect the main engine wiring harness clips from the breather tube brackets.
