Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
30. Remove the two ground wire bolts from the upper intake manifold and position the ground wires and main wiring harness aside.
31. Remove the two front breather tube bracket-to-upper intake manifold bolts.
32. Disconnect the front breather hose from the front valve cover.
33. Remove the fuel tube mounting bracket bolt.
34. Disconnect the coolant hose from the top heater core pipe.
35. Disconnect the EGR temperature sensor electrical connector.
36. Disconnect the idle air control (IAC) solenoid electrical connector.