Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the A/C ambient air temperature sensor bolt.
3. Remove the Cold Engine Lockout (CELO) switch.
4. Disconnect the A/C ambient air temperature sensor electrical connector and the outside air temperature sensor electrical connector and remove
from vehicle.
5. Remove the A/C ambient air temperature sensor from the A/C ambient air temperature sensor bracket.
INSTALLATION
1. To install, reverse the removal procedure.
2. Tighten the A/C ambient air temperature sensor bracket bolt to 10 N.m (89 lb-in).
