Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Center Mounted Brake Lamp: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the four rear hi-mount lamp cover screws.
3. Remove the rear hi-mount lamp cover.
4. Pull the rear hi-mount lamp from the vehicle.
5. Turn and remove the two rear hi-mount lamp miniature bulb sockets from the rear hi-mount lamp.
6. Remove the rear hi-mount lamp from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.