Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
5. Support the front wheel bearing inner race and using Bearing Cup Replacer T80T-4000-P and Driver Handle T80T-4000-W, press the front wheel
hub into the front wheel knuckle and front wheel bearing assembly.
6. Install the wheel hub, wheel knuckle and wheel bearing as an assembly.
Installation
1. Position the front wheel hub, front wheel knuckle and front wheel bearing as an assembly on the front wheel driveshaft and joint.
2. Install the front wheel knuckle into the front shock absorber.
3. Install the two front shock absorber-to-front wheel knuckle bolts.
4. Install the two front shock absorber-to-front wheel knuckle nuts. Tighten the front shock absorber-to-front wheel knuckle nuts to 127-147 Nm
(94-108 ft. lbs.).
5. Install the front brake anti-lock sensor bolt. Tighten the front brake anti-lock sensor bolt to 1.8 to 2.4 Nm (16-21 inch lbs.).
6. Install the tie rod end in the-front wheel knuckle.
